-
Develop custom signal processing applications on
FPGA using this generic development platform.
-
Xilinx Spartan-3 XC3S2000-4 FPGA features 2 million system gates,
720Kbit of dual port memory, 40 dedicated 18x18 multipliers.
-
Analog front end (AD9860) features
2 10-bit high-speed ADCs 64Msamples/s
2 12-bit high-speed DACs 64Msamples/s
2 10-bit ADCs and
3 8-bit DACs
-
USB 2.0 interface supports signaling rates of
480 Mbits/s (High Speed) and 12 Mbits/s (Full Speed). Typical sustained
data throughputs are 85 Mbit/s (HS) and 6.5 Mbit/s (FS).
-
Temperature sensor.
-
32Mb non-volatile flash memory stores up to 4
distinct FPGA configurations (3 custom + 1 fixed baseline). The selected
configuration is automatically reloaded at power up or upon command within
2.2 seconds.
-
Graphical User Interface is used for remote
monitoring and control over USB. This includes loading FPGA configuration
file into flash (non-volatile). FPGA configuration can also be loaded via
a JTAG cable (volatile).
-
This module is interface compatible with other
pre-programmed ComBlock modules.
-
120 MHz maximum practical FPGA processing clock
rate (typ.)
-
ComScope
–enabled: key internal signals can be captured in real-time and
displayed on host computer.
-
Includes NGC components
(software drivers) for USB 2.0/1.1 and AD9860 mixed-signals front-end.
-
Single 5V supply with reverse
voltage and overvoltage protection. Connectorized 3”x 3” module for
ease of prototyping. Standard 40 pin 2mm dual row connectors (left, right,
bottom).
178 KB 