COM-1200 FPGA Development Platform (Spartan-3 2000) & Tx/Rx

  • Model: COM-1200
  • Shipping Weight: 0.5lbs


Add to Cart:
Develop custom signal processing applications on FPGA using this generic development platform
Xilinx Spartan-3 XC3S2000-4 FPGA features 2 million system gates, 720Kbit of dual port memory, 40 dedicated 18x18 multipliers
Analog front end (AD9860) features:

2 10-bit high-speed ADCs 64Msamples/s
2 12-bit high-speed DACs 64Msamples/s [1]
2 10-bit ADCs and
3 8-bit DACs

USB 2.0 interface supports signaling rates of 480 Mbits/s (High Speed) and 12 Mbits/s (Full Speed). Typical sustained data throughputs are 85 Mbit/s (HS) and 6.5 Mbit/s (FS)
Temperature sensor
32Mb non-volatile flash memory stores up to 4 distinct FPGA configurations (3 custom + 1 fixed baseline). The selected configuration is automatically reloaded at power up or upon command within 2.2 seconds
Graphical User Interface is used for remote monitoring and control over USB. This includes loading FPGA configuration file into flash (non-volatile). FPGA configuration can also be loaded via a JTAG cable (volatile)
This module is interface compatible with other pre-programmed ComBlock modules
120 MHz maximum practical FPGA processing clock rate (typ.)

This product was added to our catalog on Sunday 25 December, 2016.

Your IP Address is:
Copyright © 2024 ComBlock. Powered by Zen Cart